Visitor card behind furuno ais is for the gates up at GL3 if you need to get through for a dart or get some water .
spigot bilge hose has been kinked and has a hole in it ESR sent to replace . And a MRF sent
Genset is leaking coolant a couple of hoses need replacing MRF in
engine room door alarms have been fixed
had revup stuck alarm coming on , Brody re calibrated and seems to be ok now .
Whole new system replaced fwd main cabin aircon . Works good now nice and quite and cool. There is a corner missing they still need to add a part for a new remote . Old remote runs both aircon just make sure you point it close and into the corner that is open to turn on or off and adjust.
I've ordered a new line to replace the stern at GL3 .
watchbill has been updated there is now a master incapacitated section.
put a new sticker on the back wall above fire extinguishers
new hatches on fuel bund area still leak though there the wrong type so keep an eye on them for water ingress make sure the Deckie doesn't blast them when hosing down . MRF sent
Sanitary bins changed .