I have ordered new fire pump impellers as starboard was stuffed, as well as some 3amp blade fuses for CCTV 12v supply under dash (is spot to put spare fuses in fuse holder)
port jet has been leaking oil, have replaced a missing nut so will need to monitor but is still leaking oil
Starboard fire pump is sucking some air have put in MRF for this as need new clamp in port engine room to stop sucking air but otherwise is still operational
Have started to remove stickers with safty razor slow progress sofar best to do at cp1 and cp3 as pontoon at ok height to reach roof stickers. Started using boiling water and it worked well as long as directly on sticker you are removing. I did not know about steamer (there is one available in the office).
there is a spare camera under the dash for the port engine room just need a battery drill to mount it.
Kim's notes: Std fire pump flange leaking, port fire piping are pitted and leaking, when using there is lot of air through the system, so not pumping a good flow of water. This will be a major repair, Genset water pump skin fitting through hull stem is also pitted and leaking, also a major job. Mrf's have be put in. Test and tag has be done, first-aid box also. Still waiting on lights for std analog gauges. All emails worth reading are flagged.