Hi Nathan,
congratulations on the full time gig mate.
I’ve only been on here Monday and Tuesday but I’ll run you through as much as I can.
Im running the engines at a maximum of 1700rpm.
The starboard engine is still leaking oil badly. Don’t fill it to the full level, only around the half mark. It is needing a top up of between 1 and 3 litres every 2 days.
I changed the soaker pads out on Tuesday after the break but they likely will look very dirty again by the time you look. They need changing daily in the starboard engine room. Port side isn’t too bad with leaks.
the port rudder indicator is not working, the starboard rudder indicator is around 5 degrees to starboard when the boat is going straight.
the Genset was installed last weekend and so far it seems all good. Feel free to give me a call when you’re starting up in the morning if you want some clues to it.
theres a new maintenance phone number now, I’ve put the sticker on the dash over the top of the old one, it’s also been sent via email which I’ve flagged.
i can’t think of too much else at the moment, but if you have anything strange pop up, feel free to call anytime mate.
thanks,
Steve