Vessel was slipped and had bottom cleaned and cooling pipes cleaned
Both turbos have been swaped out with new ones . Try to stay 90% load or less to prevent them from cracking
Gear box leaks fixed
Stbd motor has all new injectors
New schedule for shutdown started your first run is at 0530 from gl3
Check email from willie for bruce transfers trojan doin most of them
Genset has been looked at again and had a brand new ECU put on still shutting down regularly. let willie no if nothing more gets done about it
Vessel has been scrubbed inside and out . Roof sides and bow truck washed . Floor scrubbed . All windows cleaned . Toiloet hosed out . All seats disenfected and polished . Wheel house vaccumed and polished
Port side was overheating at 90% load when we first swung on after the bottom clean it seems to be ok getting upto 91 max just keep an eye on it
Port side is due for new injectors
0530 run from gl3 getting about 120 pax
Hosed pontoon at gl3
Genset onstart up is squeeling due to loose belt maintenance request in
Genset had a coolant leak new water pump put on and leak fixed
Radio still not working been using the one next to house radio
Email from willie when loading the 1545 run make sure passengers aware that boat is goin to qc1 . Some people are getting on the spirit 1525 run and it goes to gl3 but there supposed to be goin to qc1
Gas sniffer has to go up to office next week email from willie
Topped all oils and coolants
Fueling up Tuesday and Friday nights has been working well with the new schedule.
Cleaned pt and and stb engine room bilge