-continue and complete weekly/2 weekly/monthly maintenance and cleaning tasks. (Dataweb)
-pumped fresh water out of bilges from previous day flushing port aft/comp 4 bilge.
-found switch for sullage pump out and the rest of the overboard side of the system (solenoid, sani-loo) has been disconnected so now only the manual button that must be held in will discharge treated and macerated sullage this will take 2 crew to do manually till rectified. Found isolator in panel after discussion and system back to normal !
Maintenance day 28/05024
-Measure sullage for new sensors
(Big) Sullage Tank
Height - 1219mm
Length - 2020mm
Width - 500mm
Sent to bill to order required replacement senders.
-replace sullage discharge pump (gulper)
Spare kept in mid deck cleaning cupboard.
-remove oxidation from port and strb side exhaust areas and topsides.
-clean out upper deck level aircon vents and filters, disinfect.
-clean out port engine room bilge (oil leak from turbo drain dropping a fair bit since last clean out 2 weeks ago)Wet vac dry, degrease, replace bilge mats.
Big coolant leak filling up centre stringers under engine also removed again, a lot of corrosion appearing in engine bay, along side engine and other components (oil filters, Eng mounts, block has paint corroding away now)
-replace saddles at seagate entrances (saddle to tie off seagate lock for security making way. Tefgel holes and rivit fastenings.
-clean out dishwasher remove seal and post to group to inform crew who didn’t realise it comes out to be cleaned
-clean out sea water strainers for all machinery, remove bad growth form some meshes chlorine treat and scrub clean inside.
-polish toilet mirrors in attempt to remove some of the scratches, has helped a fair bit, they aren’t ever coming back 100% but do look a fair bit better after polish and elbow grease.
-wash and wax/spot clean stains on port side topsides deck level 1 to rubbing strip, full length.
-clean out fire locker and tool bag, remove all grease/oil/product spills from cupboard and tool bag, degrease all tools and clean out actual bag and make spotless, dry ready to use again.
-mrf toilet interior wall for severe corrosion
-reset ziptap filter expiry dates, needs to be done every 6 months, filter not actually changed though.
-fit a saddle to inside of fire locker door with lanyard and securing hook to hold it against door stop and cancel swinging.
-remove deep stains off aft deck white bar
-arrange articles in storage cupboards in galley.
-clean interior and prep for charter