-drilled and fit nut and bolt to broken beach tent leg as to stop it sliding up inside of the base and getting stuck.
-continued monthly, 2 weekly, weekly maintenance lists (dataweb)
-Inspect seawater strainers.
-top up sani-loo
*no smaller containers around at time had to bring big bottle of chlorine onboard.
-test back up fresh water and salt water raw water supplies for appliances.
-inspect survey equipment for tenders present and dry intact, all ok.
-inspect all vessel battery terminals secure, batteries secured in box and dry.
-complete current and replace paper/dataweb maintenance forms.
-tender training with Renee Essex
-replace Portside Genset catch can filter drained oil from catch can into oily waste drum (leaked a little oil on Eng room floor before replaciement)
-mrf for strb side catch can filter, noted that pt side was already replaced today 15/04
-checked all tender survey equipment, still waiting for Epirb.
-Sea strainers checked.
-continued weekly, 2weekly, monthly.
-mrf weld on tender cradle (bow end, side support beam) (not load baring)
Maintence day (Thai) 16-04-24
-fix bow seal on tender
(rubber a little to hard, isn’t forming a seal, needs to be done again with softer rubber)
-replaced through hull fire fight raw water pick up line and cap, strb steering flat.
-replaced 2 top cameras.
*heads up, as I was shutting down the float switch feed on strb and port engaged as it does when shutting down with "exit mode" before I turned the float switch feed off I could hear the strb main Eng room bilge pump on the right side looking frd whilst in the space, started, tried to flip the floats a few times to turn off but seems like the float has failed and remains in the "on" position so do ensure to not engage the float switch feeds until we get that float replaced. need to MRF it tomorrow if thats ok mate, I would have stayed and fixed and/or MRF'd if I was allowed to but had to go as was driving crew home.
Have a love day couple days mate