The new air cons are working well. We have had one trip out of power so far and found it to be on our 15:40 run. I am sure this was due to the customers leaving the back doors open when waiting for the Run to commence. It seems to strip the cabin of any cool air quickly and the Aircons go into overtime. This did not happen when we left the back doors closed. Still running this theory so will update later. Paul
After loosing power and shutting of Genset we reset the Genset and turned it back on. At this point we were not getting any raw water tailes. Brodie seems to think that this was caused by the relays not engaging for the pump. The relays are positioned just inside the first aid cabinet door upwards on the inside of the dash (be carful of the wires there as they are 3 phase). There are two one for power and one for pump. These relays should have a green light on them when activated. Brody will order some more and replace. I will update this when done. Paul
A new phone has been put on the boat due to damage from a swelling battery. Luke has transferred everything to the sim and it has been put into new phone. The phone box has a new charger, cord and manual in it if it is needed at a later date. I have placed the box under the dash until everyone is happy with the functions of the new phone. New passcode is 0000. Paul
genset 250hr Service conducted 14/11 @ around 2067hrs
We have had a few Covid transfers already. Direction from the office is that to make sure that the client has followed the protocols an that we follow ours when they arrive on boat. The adhoc has to be logged as a Covid case in ships log and on iPad. Paul
Hydrostatic Release units due for replacement December 2023 SRF has been put in. Paul/ replaced 24/11/23 expirations November 25 has been added to dataweb certificate register
metal Genset strainer looking sad have put a MRF in for its repair 9166 Paul
have ordered new stickers for EMERGENCY STEERING and FIRE FLAPS (Genset)
please ensure any irrelevant emails are continuously deleted so as to prevent the mailbox from filling to capacity and limiting incoming and outgoing emails
check flagged emails
NOTE as of 27/11/23 there is a change to the time table.
All chart corrections up to date.
The Genset heat exchanger mounting plate has 2 bolts striped out in it. MRF has been put in.