Hi Ryan,
*Welcome back. Merry Christmas and Happy new year to all of you.
* All mains running well. Scania engineer rep. Visited and adjusted both aft mortars idling rpm@650.Nothing changes.Vibration still need to fix.
* all four mains have minor exhaust leaks from lagging joints you would see. MRF initiated.
*Both outer raw water lines weld joints(copper lines) start rusting around the joints near strainer box with minor leaks .MRF initiated.
*Port genset stalled few times during first week and now running well with no interruptions. Still MRF is open. If it stalls again check the warning light comes up at genset control box and let Broady know. He needs to know the which alarm to figure out the fault.
*All weeklies and other returns done.
*Replace the hatch seal of E/R hatch .
*Found that anodes inside the strainer box slightly or no touching the raw water causing poor catodic protection. MRF initiated.Have a look when u are cleaning strainers. Anodes are eaten up to the water level.
Give me a ring if need to clarify anything.
Enjoy your swing.
Cheers,
Jag